PocketWizard CM-N3-ACC Canon Motor Drive Cable
The PocketWizard CM-N3-ACC Remote Cable is for remotely triggering the electronic shutter release of Canon cameras equipped with a N3 Remote Terminal. It is required for remote camera triggering with a FlexTT5 trigger if using E-TTL functions. In addition, the PocketWizard CM-N3-ACC cable contains a pre-trigger connection. When a remote zone is enabled on a MultiMAX, the camera behaves as if the camera's shutter release button were held half-pressed continuously. The PocketWizard CM-N3-ACC makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes.
Cable length: 3' (91.5 cm)
From 1/8" (3.5 mm) Mono Miniphone to Canon N3 terminal.
Compatible with cameras using Canon's N3 Remote Terminal including:
EOS-1D Mark II
EOS-1D Mark III
EOS-1Ds Mark II
EOS-1Ds Mark III
EOS-5D Mark II
EOS-60D - not compatible (the 60D uses an "E3" rather than "N3" socket")