PocketWizard N90-M3-P Motor Drive Cable - Nikon N90

PocketWizard N90-M3-P Nikon Motor Drive Cable

Pre-trigger remote cable for remotely triggering the electronic shutter release of cameras with a Nikon 10-pin Remote Terminal.

Cable length: 3' (91.5 cm)
From Nikon 10-pin Remote Terminal
To Pre-trigger Switch
To 1/8" (3.5 mm) Mono Miniphone

The Pocket Wizard N90-M3 is designed for use with the Nikon 10-pin remote terminal. The motor drive cord is 3-foot long and connects a Pocket Wizard transceiver to a Nikon camera (via the 10-pin remote socket) to allow it to be triggered using a second transceiver from up to 1600ft/500m away. This is an ideal setup when the photographer cannot remain with the camera - for example behind the goal posts or in a ceiling rig above an event.

Compatible with cameras using Nikon's N90 Remote Terminal including:
Nikon N90
Nikon N90S
Nikon F5
Nikon F6
Nikon F100
Nikon D1
Nikon D1X
Nikon D1H
Nikon D2X
Nikon D2Xs
Nikon D2H
Nikon D2Hs
Nikon D3
Nikon D3X
Nikon D3s
Nikon D100 (only works when using MB-D100)
Nikon D200
Nikon D300
Nikon D300s
Nikon D700

PocketWizard N90-M3 Motor Drive Cable - Nikon N90 £60.29 inc 20.0% VAT RRP £66.99 Save £6.70 In Stock

PocketWizard N90-M3-P Motor Drive Cable - Nikon N90 £74.69 inc 20.0% VAT RRP £82.99 Save £8.30 Out of stock

PocketWizard N90-M-ACC Motor Drive Cable - Nikon N90 £74.69 inc 20.0% VAT RRP £82.99 Save £8.30 Special Order