|
PocketWizard N90-M-ACC-ND Nikon Motor Drive Cable
This is the ND version of the cable, which contains the "no-diode" circuit required by the Nikon D700.
The PocketWizard N90M-ACC-ND Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR's cameras equipped with a 10 pin Remote Terminal. It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if using TTL functions. In addition, the PocketWizard N90M-ACC cable contains a pre-trigger connection. When a remote zone is enabled on a MultiMAX, the camera behaves as if the camera's shutter release button were held half-pressed continuously. The PocketWizard N90M-ACC makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. This cable WILL work with the D700, but will not work with the D100 and D200..
Cable length: 3' (91.5 cm)
From Nikon 10-pin Remote Terminal
To Pre-trigger Switch
To 1/8" (3.5 mm) Mono Miniphone
Compatible with cameras using Nikon's N90 Remote Terminal including:
Nikon N90
Nikon N90S
Nikon F5
Nikon F6
Nikon F100
Nikon D1
Nikon D1X
Nikon D1H
Nikon D2X
Nikon D2Xs
Nikon D2H
Nikon D2Hs
Nikon D3
Nikon D3X
Nikon D3s
Nikon D300
Nikon D300s
Nikon D700
Nikon D100 not compatible
Nikon D200 not compatible
|
Thanks for shopping with Premier Ink & Photographic. If you'd like to keep up to date on all of our latest announcements and special offers you can follow us on Twitter or "Like" us on Facebook using the links below. Thanks!